Connect Poc Camera - HIKVISION DS-7100HQHI-K1 Series User Manual

5.3.2 Connect PoC Camera

The devices of /P series can detect the connected PoC cameras automatically, manage the power
consumption via the coaxial communication, and provide power to the cameras via coaxitron.
Before You Start
● Ensure your device supports PoC (Power over Coaxitron) cameras connection.
● Ensure your device has free analog channel resource. The analog channel resource is
configurable in Configuration → Camera → Analog.
● Connect the PoC camera to the DVR.
Steps
Caution
Only Hikvision PoC camera is supported. Please turn off the PoC function if the camera does not
support PoC, or the camera is not produced by Hikvision. Otherwise, it may result in permanent
damage to the camera or DVR.
1. Go to Configuration → Camera → Analog → PoC Setting.
2. Turn on the PoC for the channel(s) as your desire.
3. Check the status of connected PoC camera.
● If the power consumption of the DVR is lower than that of AF camera, when AF or AT camera
is connected, there is no video and Insufficient Power for PoC would be overlaid on the live
view image.
● If the power consumption of the DVR is higher than that of the AF camera and lower than
that of the AT camera, when AF camera is connected, it would be powered on normally;
when AT camera is connected, it would be powered on and then powered off, thereafter, the
DVR displays Insufficient Power for PoC on the live view image.
● If the power consumption of the DVR is higher than that of the AT camera, when AF or AT
camera is connected, it would be powered on normally.
4. Check the connected AF or AT camera number and the connectable camera number.
Digital Video Recorder User Manual
Figure 5-8 Connect PoC Camera
26