HIKVISION DS-7100HQHI-K1 Series User Manual page 59

Steps
1. Go to Configuration → Network → General → Wi-Fi.
Note
The Wi-Fi setting interface will automatically pop up when you insert the Wi-Fi dongle for the
first time.
2. Connect to a wireless network.
Connect to an
Automatically
Searched Wireless
Network
Connect to a
Customized Wireless
Network
Connect to a
Wireless Network
with WPS (Wi-Fi
Protected Setup)
Note
If you requires to edit or forget the network, double click the connected network, and edit it as
your desire.
After connecting to an available wireless network, you can view the connection result in
Connection Status.
3. Go to Configuration → Network → General → TCP/IP.
4. Set Select NIC and Default Route as WLAN0.
5. Check Enable Wi-Fi.
6. Set other network parameters.
7. Click Apply.
Digital Video Recorder User Manual
1. Double click the wireless network from the list as you desired.
2. Set wireless network parameters.
3. Click OK.
1. Click Custom Adding.
2. Set wireless network parameters.
3. Click OK.
1. Click WPS Settings.
2. Check Enable WPS.
3. Set wireless network parameters.
4. Click Apply.
45