Page 1
One companion CD One RS-232 9-pin Male-Female D-sub cable (CA-0915) One GPRS antenna Related Documents and Software Utilities Documents User manual: GTM-201_User_Manual Quick Start Manual: GTM-201-RS232_QuickStart_Manual CD: \napdos\GPRS_GSM_Modem\GTM-201_Modem\Manual Http://ftp.icpdas.com/pub/cd/usbcd/napdos/GPRS_GSM_Modem/ GTM-201_Modem/Manual View of the GTM-201-RS232 Panel GTM-201-RS232 Ver 1.00 www.ipc2u.ru www.icp-das.ru www.ipc2u.de www.ipc2u.com...
GTM-201-RS232 Quick Start Pin Assignments SW1-Operation Mode Handshaking None 3-wire RS-232 Hardware Handshaking RTS/CTS 9-wire RS-232 RST+ RESET RST- Frame Ground F.G. Power Input: DC.GND +10 ~ 30V DC.+VS Reset Wire Connection Input Type Reset State Reset State Reset Input...
Page 3
GTM-201-RS232 Quick Start Connect the GTM-201-RS232 to power and PC SIM card and Antenna Installation SIM Card GTM-201-RS232 Ver 1.00 www.ipc2u.ru www.icp-das.ru www.ipc2u.de www.ipc2u.com...
Page 4
GTM-201-RS232 Quick Start Quick Test (Hyper Terminal) Step2. Please refer to below settings Step1. Start → All Programs → Bits per second 115200 Accessories → Communications → Data bits Hyper Terminal → Input new connection Parity None name → Click “OK” → Select your PC Stop bits serial port →...
Page 5
GTM-201-RS232 Quick Start Create a new modem Step2. Select ”Standard Modem Types” → connection on PC Select “Standard 19200 bps Modem” → Step1. Control Panel → Double-click Click “Next” “Phone and Modem Options” → Modem → Click “Add” Step4. Control Panel → Double-click “Phone and Modem Options”...
Page 6
GTM-201-RS232 Quick Start Step6. Advanced → Extra initialization Step5. Control Panel → Double-click “Phone and Modem Options” → Modem commands: → Select “Standard 19200 bps Modem” Note: GPRS’s APN must be provided from → Click “Properties” → Modem → your Telecom. CO., LTD.
Page 7
GTM-201-RS232 Quick Start Create a new dial-up on a Step2. Select “Connect using a dial-up Step1. Control Panel → Network modem” → Click “Next” Connections → Click “Create a new connection” → Click “Next” → Select “Connect to the Internet” → Click “Next”...
Step7. Contral Panel → Network successfully, your toolbar have Connections → Double-Click “Your new logo GPRS’s name” → Click “Dial” Technical Support 1. ICP DAS Service : service@icpdas.com 2. GTM-201-RS232 software Website: http://www.icpdas.com./products/GSM_GPRS/wireless/ GTM-201.htm GTM-201-RS232 Ver 1.00 www.ipc2u.ru www.icp-das.ru www.ipc2u.de...