1. Manuals
  2. Brands
  3. ICP DAS USA Manuals
  4. Modem
  5. SST-2450
  6. User manual

ICP DAS USA SST-2450 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SST-2450 Wireless Modem User' s Manual
Warranty
All products manufactured by ICP DAS are warranted against
defective materials for a period of one year from the date of delivery
to the original purchaser.
Warning
ICP DAS assumes no liability for damages consequent to the use of
this product. ICP DAS reserves the right to change this manual at
any time without notice. The information furnished by ICP DAS is
believed to be accurate and reliable. However, no responsibility is
assumed by ICP DAS for its use, or for any infringements of patents
or other rights of third parties resulting from its use.
Copyright
Copyright 2002 by ICP DAS. All rights are reserved.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.
SST-2450 Wireless Modem User' s Manual Ver1.5 , Feb /2003, OMH-030-10, ---1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SST-2450 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ICP DAS USA SST-2450

Summary of Contents for ICP DAS USA SST-2450

  • Page 1 Copyright Copyright 2002 by ICP DAS. All rights are reserved. Trademark The names used for identification only may be registered trademarks of their respective companies. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---1...

  • Page 2: Table Of Contents

    10. Appendix ..… … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 26 SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---2...

  • Page 3: Introduction

    It is also useful for those applications where the installation of cable wire is inconvenient. The SST-2450 can be used not only in peer-to-peer mode (refer to page 8), but also in a multi-point structure (refer to page 13).

  • Page 4: Specifications

    121.5mm (L) x 72mm (W) x 33mm (H) Weight: 200g Operating temperature range: 0~50C Operating humidity range: 0~90% SST-2450 can work together with SST-2400 (however the 8051 chip in the SST-2400 must be changed). SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---4...

  • Page 5: Product Description

    Product Description 3.1. Pin assignment SST-2450 Radio Modem Frequency Range : 2410~2471MHz Channel Space : 4,096 Mhz Communication Range : 100-300M Interface :RS-232/RS-485 (RS-232) (RS-485) SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---5...

  • Page 6: Block Diagram

    The signal can pass thorough a cement wall, but will be weakened to half its efficiency for every 15cm of the wall’ s thickness. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---6...

  • Page 7: Applications

    Mode Description: In this mode, the SST-2450 can accept and transmit any signal from the device. This mode works by using a sample and rebuild. The SST module samples the input signal then converts it into a wave signal technique before transmitting it to another SST module.

  • Page 8: Pc To Pc Connections -- Using Mode 1

    PC to PC connections 4.1.1. -- Using Mode 1 Full-Duplex Full-Duplex Asynchronous Asynchronous Master Slave Baudrate: 9600bps Max. Baudrate: 9600bps Max. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---8...

  • Page 9: Connecting A Pc To The 7000 Module - Using Mode 2

    4.1.2. Connecting a PC to the 7000 module – Using Mode 2 Full-Duplex Full-duplex Synchronous Synchronous Master Slave Baudrate: 57600bps Max. Baudrate: 57600bps Max. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---9...

  • Page 10: 7188 Embedded Controller To 7000 Module - Using Mode 3

    4.1.3. Connecting the 7188 Embedded Controller to the 7000 module – Using Mode 3 Both SST-2450 modules are setting as follows: Half-Duplex Synchronous Slave Baudrate: 57600bps Max. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---10...

  • Page 11: Connecting A Pc To A Plc - Using Mode 3

    PC to a PLC 4.1.4. Connecting a – Using Mode 3 Both SST-2450 modules settings are as follows: Half-Duplex Synchronous Slave Baudrate: 57600bps Max. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---11...

  • Page 12: Using The 7188 As A Bridge -- Using Mode 3

    4.1.5. 7188 as a Bridge -- Using the Using Mode 3 Both SST-2450 modules settings are as follows: Half-duplex Synchronous Slave Baudrate: 57600bps Max. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---12...

  • Page 13: Network Communication

    4.2. Network communication 4.2.1. Application 1 All SST-2450 modules settings are as follows: Half-Duplex Synchronous Slave Baudrate: 57600bps Max. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---13...

  • Page 14: Application 2

    4.2.2. Application 2 All SST-2450 modules settings are as follows: Half-duplex Synchronous Slave Baudrate: 57600bps Max. Data Format: E,8,1 SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---14...

  • Page 15: Quick Start Instructions For The Sst-2450

    Quick Start instructions for the SST-2450 The SST-2450 is set by using a software utility. By using this tool, you are able to avoid disassembling the case. The utility not only provides a setting interface but also a testing interface. When you have finished making the settings, you can simply click a button to test the SST-2450 using the same software.
  • Page 16 3. Click “Exit Setup” to cancel the installation. Once the software has been installed, you will be able to find the executable file in StartèApplication fileèSST-2450 Setting Tool. SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---16...

  • Page 17: Sst-2450 Setting

    5.2. SST-2450 Settings When setting the SST-2450, you should first use a wire to connect the SET and GND pins. Quickly power off and power on the SST-2450, then launch the setting software program. There are only 3 steps required to make your settings.
  • Page 18 1. Select a COM port from which your SST-2450 is connected to the PC. In the setting mode, the baud rate must be set at 9600bps and the Line control values must be N, 8,1. Click the “Open” button to open a connection to the device then click the “Setting SST-2400”...

  • Page 19: Testing The Sst-2450

    5.3. Testing the SST-2450 This tool is for testing the transmissions between two PCs using the SST-2450. Please note that before you use this function, you must make sure that you have removed the wire that you used to connect the SET and GND pins. The testing method is as follows: 1.

  • Page 20: Troubleshooting

    Troubleshooting Setting error If you are attempting to set your SST-2450 using the software, but are unable to access the setting tool, the following screen will appear. Follow the steps shown on the error screen. Testing error If you are attempting to test your SST-2450 using the software, but are unable to access the testing tool, the following screen will appear.

  • Page 21: Dimensions

    Dimensions 29.50 O4.5X4 56.00 2-SCREW 25.00 33.00 40.50 Rear View Back View 72.00 Side View Top View 56.00 58.50 From View 72.00 Front View SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---21...

  • Page 22: Din-Rail Mounting

    Din-rail Mounting SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---22...

  • Page 23: External Antenna

    1KM. 9.1. ANT-3 (Directional) Gain: 3dBi Polarization: circular Power handling: 5W Impedance: 50 Ohms Connector: SMA Cable: RG-58, 100cm Gain Pattern Usage Diagram SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---23...

  • Page 24: Ant-8 (Omni Directional)

    9.2. ANT-8 (Omni directional) Gain: 8dBi Polarization: Linear Power handling: 10W Impedance: 50 Ohms Connector: SMA Cable: RG-58, 100cm Gain Pattern V-Plane Field Patterns H-Plane Field Patterns Usage Diagram SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---24...

  • Page 25: Ant-12P (Directional)

    9.3. ANT-12P (Directional) Gain: 12dBi Polarization: Linear Power handling: 10W Impedance: 50 Ohms Connector: SMA Cable: RG-58, 100cm Gain Pattern V-Plane Field Patterns H-Plane Field Patterns Usage Diagram SST-2450 Wireless Modem User’ s Manual Ver1.5 , Feb /2003, OMH-030-10, ---25...

  • Page 26: Appendix

    10. Appendix How should I communicate between the SST-2450 and the SST-2400? If you want to use the SST-2400 to communicate with the SST-2450, you need to contact the local distributor to get new chip with new firmware. Then refer to Figure 10.1, Figure 10.2 and Table 10.1 to adjust the suitable SST-2400 jumper...

This manual is also suitable for:

Sst-2450ext

Table of Contents