Table of Contents
Advertisement
Overview
This chapter provides detailed information on the features of the VP2120's on-
screen display (OSD), and how to locally operate the unit using the front-panel
pushbuttons and the IR remote control. You can perform the following tasks
through the OSD:
Switch display sources
Change the display behavior, resolution, or aspect ratio settings
Stream out (go live) the displayed content (display A or B) via network
connection
Configure the VP2120
Make screen captures
View logs of user actions in the OSD and the web interface
Use whiteboard to communicate with meeting participants in real-time
Operation Considerations
The IR remote control and the VP2120's front panel offer the same
operation capability. Use either method as required.
Note: In this manual, "buttons" is used to refer to the buttons on the IR
remote control, and "pushbuttons" is used to refer to the front-panel
pushbuttons.
Use the IR remote control within the effective range (6 m), and that there
is a clear line-of-sight between the remote control unit and the IR receiver
connected to the VP2120.
When using the ATEN Video Presentation Control App, make sure your
mobile device is connected to the same network environment where the
VP2120 is installed.
Local Operation
Chapter 3
13
Advertisement
Table of Contents
