Z GRILLS MULTITASKER 11002B Owner's Manual page 14

2.ATTACHING THE CHAMBER LID HANDLE
From the inside of the raised lid, push the Screws (BB) through the Handle Base Tube (CC)
and then through the lid (1) and Handle Base (13). Handle should sit inside the depression in
the guide. Thread Screws (BB) into Handle (14) and tighten with Screwdriver (FF).
3.ATTACHING THE SIDE HANDLE
Remove the Screws assembled on the Side Handle (15). Use the Screws to pass through
the Side Handle (15) and use Screwdriver (FF) to tighten, as shown.
12