Z GRILLS ZPG-L6002B Owner's Manual

Z GRILLS ZPG-L6002B Owner's Manual

Wood pellet grills

Advertisement

WOOD PELLET GRILLS
ZPG-L6002B/ZPG-L6002E
OWNER'S MANUAL
MON TO FRI, 8:00 A.M. - 5:00 P.M. PACIFIC STANDARD TIME
SERVICE CONTACT: 1-833-947-4557/1-833-ZGRIL
EMAIL: support@zgrills.com
WEBSITE: www.zgrills.com
VN08012019

Advertisement

Table of Contents
loading

Summary of Contents for Z GRILLS ZPG-L6002B

  • Page 1 WOOD PELLET GRILLS ZPG-L6002B/ZPG-L6002E OWNER’S MANUAL MON TO FRI, 8:00 A.M. - 5:00 P.M. PACIFIC STANDARD TIME SERVICE CONTACT: 1-833-947-4557/1-833-ZGRIL EMAIL: support@zgrills.com WEBSITE: www.zgrills.com VN08012019...
  • Page 3: Table Of Contents

    CONTENTS WARNINGS COMPONENT LIST ASSEMBLY INSTRUCTIONS INITIAL FIRING INSTRUCTIONS SUBSEQUENT START-UP OPERATING TIPS MAINTENANCE & CLEANING TROUBLESHOOTING DIGTAL THERMOSTAT CONTROL WIRING DIAGRAM Z GRILLS SUPPORT 3-Y LIMITED WARRANTY...
  • Page 4 SAVE THIS MANUAL FOR FUTURE REFERENCE...
  • Page 5: Warnings

    NOT unplug the power cord. DO NOT throw water on it. DO NOT try to smother the fire. Clean and maintain your grill after each use. We suggest that you use Z GRILLS BBQ WOOD PELLETS, which are specifically made to work in our grills. DO NOT use your grill on rainy days.
  • Page 6: Component List

    COMPONENT LIST ITEM DESCRIPTION ITEM DESCRIPTION Grill Chamber Assembly Smoke Stack Assembly Furnace Hinge Chimney Cap Assembly Lid Hinge Upper Hopper Safety Grate Fixed Plate Lid Handle Hopper Burner Lid Digital Control Hopper Assembly Lower Hopper Safety Grate Hopper Handle Cable Clip Support Frame Power Cord...
  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTIONS PARTS DIAGRAM Hopper Burner Assembly:...
  • Page 8 Body Frame Assembly: 1.Mounting the Body Frame 1.Insert the Left Front Leg (45) and Left Rear Leg (44) into the Food Pads (46). 2.Secure Legs (44)(45)(50)(51) on the Bottom Plate (47) with Bolt (A). 3.Insert the Axle (49) through the holes in the Bottom Plate (47) and Legs (50)(51), assemble the Nut (K) onto the Axle (49).
  • Page 9 2.Mounting the Body Frame to the Chamber 1.With the help of another person, carefully attach the Grill Chamber Assembly (1) on the Body Frame and using Screw (A). Use the Screwdriver (S) to tighten. Caution: The grill is very heavy. Always lift the grill with 2 people. 3.Mounting the Hopper to the Chamber 1.Insert Bolt (C) into Hopper Burner Lid (6) and Hopper Assembly (7), align the holes, then assemble it with Nut (L).
  • Page 10 4.Locate the RTD Male Plug-In-Connector coming from the Grill Chamber Assembly. It will look like a loose wire with a connector on the end. Locate Connect the RTD Female Plug-In-Connector coming from the Hopper Assembly. Connect the two RTD Plug-In-Connectors together. Pull the RTD wire down so that it is sandwiched between the hopper and the chamber.
  • Page 11 5.Attaching the Side Table 1.Assemble Side Table (26) to the Grill Chamber Assembly (1) with Bolt (A). 2.Assemble Bottle Opener (23) to the Grill Chamber Assembly (1) with Bolt (C). 3.Assemble Tool Hook (E) to the Side Table (26). 6.Lid Assembly 1.Insert the Bolt (F) through Gasket (N) and Lid (4) and into the Lid Handle (5).
  • Page 12 7.Attaching the Fire Pot 1.Assemble the Burner Box Assembly (13) to the Side Table with Bolt (G). 2.Insert Bolt (Q) through Fixed Tube (38) and into Burner Box Assembly (13). 3.Clip the Firepot Assembly (12) into the Burner Box Assembly (13), as shown.
  • Page 13 8.Positioning the Grease Drain Pan 1.Assemble the Support Frame (9) to Chamber with Bolt (A). 2.Assemble the Mounting Plate (19) to Chamber with Bolt (C) and Nut (L). 3.Insert Bolt (H) through Spring Washer (P), Air Door (17), Grease Drain Pan (18), Gasket (O), Nut (I) orderly.
  • Page 14 9.Attaching the Cooking Grate and Warming Rack Attaching the Porcelain Cooking Grate (16) and Warming Rack (15) in the Chamber. 10.Attaching the Storage Box Assemble the Storage Box (20) to the Chamber with Bolt (A).
  • Page 15 11.Hang on the Grease Basket Hang the Grease Basket (22) on the Hook (24).
  • Page 16: Initial Firing Instructions

    Please read this manual carefully and follow it step by step before starting your Z Grills for the first time and each time the grill runs out of pellets. 1.Remove the Porcelain Grills, Grease Drain Pan and Heat Baffle from the interior of the grill.
  • Page 17: Subsequent Start-Up

    Temperature Dial to any cooking setting desired. 5.If this step is not successful, see TROUBLESHOOTING or contact Z GRILLS Technical Support to help diagnose the problem.
  • Page 18: Operating Tips

    OPERATING TIPS 1.like all grills, the actual temperature of this grill and the cooking times will be affected by external temperature, humidity, wind conditions, quality of pellets, etc. 2.It is beneficial to shelter your grill from the wind. This will aid in temperature output, heat retention and heat recovery time when the lid is open.
  • Page 19: Maintenance & Cleaning

    2.It is highly recommended that you use Z GRILLS Cover to protect your grill . 3.You can use a high-quality car wax on the outside surfaces of your grill to protect it’s finish.
  • Page 20 Clean the ash from the interior of the grill periodically. If excessive ash is in the firepot, it may cause the fire to go out. This is especially true in the SMOKE setting. A shop vac is an excellent tool to use for removing the ash. WARNING: MAKE SURE THE GRILL FIRE IS OUT, THE UNIT IS OFF, UNPLUGGED AND COLD BEFORE ATTEMPTING TO CLEAN ASH FROM THE GRILL.
  • Page 21: Troubleshooting

    TROUBLESHOOTING CAUTION: Make sure the grill is completely cool and unplugged before you do any inspection, cleaning, maintenance or service work. Potential Problem Solution Cause Make sure the power cord is plugged Power in. Verify there is power at the electrical outlet.
  • Page 22 Pellets pellets. When contacting customer support Contact please have the following information Z GRILLS available: Your authorized Z Grills Customer dealer, your name, phone number, Get your new parts Service or your address, your Z Grill serial number and Z GRILLS part identification number.
  • Page 23: Digtal Thermostat Control Wiring Diagram

    DIGTAL THERMOSTAT CONTROL WIRING DIAGRAM...
  • Page 24: Z Grills Support

    Thank you for purchasing a Z GRILL! If you have any question, please contact customer support or your Z GRILL dealer. Z GRILLS, INC. offers the best technical and sales support in the industry. When calling customer please be prepared to provide the following information: 1.Dealer's name and date of purchase...
  • Page 25: 3-Y Limited Warranty

    Z GRILLS 3 YEAR LIMITED WARRANTY Z GRILLS, Inc. provides a 3 years warranty from the date of purchase by the original owner. This warranty applies to defects in all materials and workmanship. During the warranty period, Z GRILLS, Inc. will at its option repair or replace defective parts or units.

This manual is also suitable for:

Zpg-l6002e

Table of Contents