Activating Your Device And Line Of Service; Setting Up Your Voicemail Box; The Basics - Polycom IP331 Quick Reference Manual

1.2 Activating Your Device and Line of Service

NOTE: Activating a Line of Service will immediately begin the billing for that Line of
Service.
Activating Lines
1. Log in to your Control Panel, and select Manage Voice Services.
2. Click on the "Activation" tab.
3. Under "Line Activation", select the checkbox for one or more Lines of Service,
and press the "Activate" button.
Activating Phones
If you have purchased your phone from us, then these steps are not required.
If you are adopting a phone that you have purchased yourself through the Bring Your
Own Phone (BYOP) program, then your phone will require activation through Control
Panel.
1. Log in to your Control Panel, and select Manage Voice Services.
2. Click on the "Activation" tab.
3. Under "Phone Activation", enter the MAC Address(es) of the pre-purchased
phones.
4. When all MAC Addresses have been entered, press "Save Changes".

1.3 Setting Up Your Voicemail Box

Recording an Outbound Voicemail Greeting
1. Press the Message soft key.
2. Press 1 for Messages.
3. Press the Connect soft key.
4. Enter your PIN when prompted. The first-time PIN is '0000'.
5. Follow the prompts to set up the following:
a. Your new PIN
b. Your recorded name
c. Your outbound voicemail greeting

2. The Basics