Osram TRAXON Media Pixel Ribbon DMX Outdoor Flat Mounting Manual

Safety Information

• Do not connect or disconnect the LED strip when the circuit is powered.
• Do not connect the LED strip to the power supply while it is in the packing.
• Do not connect this light to another manufacturer's product.
• Do not press on the LEDs and components to avoid physical damage.
• Interconnection shall be made only by the use of the supplied connectors. All open ends must be sealed-off before use.
• Please read the installation guide carefully for detailed installation planning.

Dimensions

11.81"±0.59"/
2.32"/59 mm
300±15 mm
0.68"/17.2 mm
0.59"/15 mm
0.79"/20 mm
Model Max. Ribbon length with single
Max. Ribbon length with
Model
p
single power feed
RGB+W 26.2' / 8 m (CE)
315"/8000 mm
RGB+W & RGB
20' / 6.1 m (ETL)
DW & W 393.7"/10000 mm
RGB 26.2' / 8 m (CE, ETL)
DW & W 32.8' / 10 m (CE)
Remark: For other customized lengths (in multiples of 3.94" / 100 mm), the actual product length would be customized length + 0.79" / + 20mm.
30.2' / 9.2 m (ETL)
RB CONNECTOR ENDCAP 120OHMIP67 (AM400870055)
Remark: For other customized lengths (in multiples of 3.94" / 100 mm), the actual product length would be customized length + 0.78" / + 20mm.
59 ± 0.5 mm
Min. Bending Radius for Ribbon body: 3.94"/100 mm

Do and Don't Do

Min. Bending Radius for cable: 1.18"/30mm

Min. Bending Radius for Ribbon body: 3.94"/100 mm
Min. Bending Radius for cable: 1.18"/30mm
RB 5PIN STARTER CABLE 1M IP67 (AM400840055)
RB 5PIN STARTER CABLE 3M IP67 (AM400850055)
CONN. 1
56 ± 0.5 mm
CONN. 1
RB RJ45 STARTER Y-CABLE IP67 (AM401000055)

48 mm
CONN. 3
DO NOT twist Media Pixel Ribbon.
Damage will be caused to the internal circuity.
DO NOT twist Media Pixel Ribbon.
39 mm CONN. 2
Damage will be caused to the internal circuity.
RB 5PIN POWER INJ Y-CABLE IP67 (AM400990055)
48 mm
CONN. 3
www.traxontechnologies.com | www.osram.us/traxon
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
CONN. 4
Mounting Guide
Media Pixel Ribbon DMX Outdoor
0.56"/14.2 mm
0.31"/8 mm
Actual product length with
ower feed
endcap at 2-ends, L
315" +0.8"/8000 + 20 mm
393.7" + 0.8"/10000 + 20 mm
≥1.18"/30mm
1000 or 3000 +/- 20mm
≥1.18"/30mm
≥ 3.94"/100mm
≥ 3.94"/100mm
59.2 ± 1 mm
CONN. 3
42.8 ± 1 mm
CONN. 2
59.2 ± 1 mm
CONN. 3
59 ± 0.5 mm
Flat Mounting Guide
L
0.20"/5 mm
Actual product length with endcap
at 2 -ends, L
26.2'+0.8" / 8 m+20 mm (CE)
20'+0.8" / 6.1 m+20 mm (ETL)
26.2'+0.8" / 8 m+20 mm (CE, ETL)
32.8'+0.8" / 10 m+20 mm (CE)
30.2'+0.8" / 9.2 m+20 mm (ETL)
Wire#
1
2
3
4
5
300 ± 20 mm
Non-Bendable Length of 0.79"/20 mm near the
150 ± 10 mm
47 ± 1 mm
connector end or near the ribbon cable entry MUST
be adhered to.
Non-Bendable Length of 0.79"/20 mm near the
connector end or near the ribbon cable entry MUST
be adhered to.
300 ± 20 mm
150 ± 10 mm
47 ± 1 mm
09/21 V1.1
11.81"±0.59"/
300±15 mm
0.43"/11 mm
Description Color
Address(PI) Green
V- Black
Yellow
DMX+
V+ Red
DMX- Blue
56 ± 0.5 mm
CONN. 1
0.79"/20 mm
CONN. 1
0.79"/20 mm
CONN. 1
56 ± 0.5 mm
CONN. 1
2.20"/56 mm
1 of 4