Troubleshooting - Silvercrest SFEE 800 A1 Operating Instructions Manual

Troubleshooting

Faults
The appliance is
not working .
The motor stops
still while juicing or
it turns noticeably
more slowly or
unevenly .
The pulp is moist
and you obtain too
little juice .
The juice wells out
between the edge
of the lid 3 and
the juice tank 5 .
The juice sprays
out of the juice
outlet 6 .
During the
processing, juice
runs down the
appliance base
7 .
SFEE 800 A1
Possible causes
The mains plug 8 is not
connected .
The appliance is not switched on . Switch the appliance on with
The clamps 4 are not secured .
The filter w is blocked .
You are working too fast .
The filter w is blocked .
You are working too fast .
The filter w or the juice tank 5
is blocked .
The speed setting is too high .
You are working too fast .
The speed setting is
too high .
The filter w or the juice outlet 6
is blocked .
The speed setting is too high .
Possible solutions
Connect the appliance to
a mains power socket .
the On/Off switch 9 .
Close the clamps 4 .
Switch the juicer off immediately
and pull out the mains plug 8 .
Remove the blockage (see sec-
tion "Juicing") .
Work a little more slowly .
Clean the filter w (see section
"Cleaning and Care") .
Work a little more slowly .
Clean the filter w and
the juice tank 5 (see section
"Cleaning and care") .
Use the on/off switch 9 to
select speed level 1 .
Work a little more slowly .
Do not press too hard with the
pusher 1 when inserting more
fruit/vegetables .
Use the on/off switch 9 to
select speed level 1 .
Clean the filter w and the juice
outlet 6 (see section "Cleaning
and Care") .
Use the on/off switch 9 to
select speed level 1 .
GB │ IE │ 13 ■