Remote Control Setup - Nice M-BOARD Instruction Manual

42 - REMOTE CONTROL SETUP

This procedure works for NICE remotes. For this setting make sure
all "Prog" switches are in the OFF position (all down) as shown below:
Remote Control Configuration Options:
Note that you have 2 buttons available (A, B) on each remote control.
Let's assume that each control will have different settings, as follows:
A
B
1st CASE:
1- Press the LEARN button once and watch the LED flash 1 time
intermittently;
2- Choose which function you want to achieve by clicking or not one
or more times always watching the LED;
3-Choose button A or B on the remote control and press;
4- Press the same button again.
5- Control configured successfully, make a trigger test.
ON
1 2
LED blinks 1 time
LED blinks 2 times Just opens
LED blinks 3 times Just close
LED blinks 4 times Only stop
LED blinks 5 times Partial opening
1st CASE - Just a button with a function.
2nd CASE - Two buttons with the same function.
3rd CASE - Two buttons with different functions.
DP
3 4 5 6 7 8
Button / Pulse
ENGLISH
97