Opening Stop Distance - Nice M-BOARD Instruction Manual

Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.

13 - OPENING STOP DISTANCE

Attention: This function works only on machine models that do not
have limit switches and are with encoder sensor. Model identification
is done automatically during the path learning process.
In this function it is possible to adjust the distance that the control unit
will turn off the engine in the open direction before touching the stop.
Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.
LED blinks 1 time
LED blinks 2 times
LED blinks 3 times
LED blinks 4 times
LED blinks 5 times
ON
1 2
LED blinks 1 time
LED blinks 2 times
LED blinks 3 times
LED blinks 4 times
LED blinks 5 times
Short
Short average
Average
Long average*
Long
DP
3 4 5 6 7 8
Short
Short average
Average*
Long average
Long
ENGLISH
77