Anti-Crush - Nice M-BOARD Instruction Manual

Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.

08 - ANTI-CRUSH

ATTENTION! Anti-crush only works with encoder sensor instal-
led.
With the clutch enabled, the control unit automatically detects obsta-
cles in the way and shuts off the engine according to the user con-
figuration.
Be aware that depending on the unbalance of the gate and the ad-
justed clutch configuration, the control unit may shut down the engine
without obstacle. We recommend leaving the gate as balanced as
possible.
To set the anti-crush set the PROG switch to the position as shown in
the figure below, and press the LEARN button according to desired
setting:
Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.
74
LED blinks 4 times
LED blinks 5 times
ON
1 2
LED blinks 1 time
LED blinks 2 times
LED blinks 3 times
LED blinks 4 times
LED blinks 5 times
Long average
Long*
DP
3 4 5 6 7 8
100%*
80%
60%
40%
20%
ENGLISH