Connection Scheme With Md-T02 - Nice M-BOARD Instruction Manual

37 - CONNECTION SCHEME WITH MD-T02

The M-Board control unit is compatible with the Nice MD-T02 modu-
le, which allows the connection of a magnetic lock or courtesy light.
In the connector shown below, there are 3 pins for connection (12V,
GND and Contact), so you can use this single connector to power
the module with 12V.
Just below, the correct connection of the module to the control panel.
Central
Contact
GND
12V
MOD connector of the central
92
Contact
MOD connector of the central
MD-T02 module
ENTRADA ENTRADA
12Vcc/24Vca
PULSO
CM (common) and NO
(normally open) contacts
to be used as a switch for
the load to be actuated (up
to 300W).
ENGLISH
GND 12V
SAÍDA
NA C