Automatic Closing; Photocell Closing Time - Nice M-BOARD Instruction Manual

Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.

19 - AUTOMATIC CLOSING

To set the auto close time, set the PROG switch to the position as
shown in the figure below, and press the LEARN button according
to the desired setting:
Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.

20 - PHOTOCELL CLOSING TIME

To set the close photo time set the PROG switch to the position as
shown in the figure below and press the LEARN button according to
the desired setting:
LED blinks 1 time
LED blinks 2 times
LED blinks 3 times
ON
1 2 3
LED blinks 1 time
LED blinks 2 times
LED blinks 3 times
LED blinks 4 times
LED blinks 5 times
ON
1 2 3
FTC NA*
Photocell closes
Count queue
DP
4 5 6 7 8
Disabled*
10 seconds
30 seconds
60 seconds
120 seconds
DP
4 5 6 7 8
ENGLISH
81