Please Visit Us At Www.balboawatergroup.com; Minimum Clearances; Compatibility - Balboa Clim8zone Installation Manual

8
MINIMUM
CLEARANCES
Follow the minimum clearance requirements shown below
during installation and operation of the CLIM8ZONE
TM
These clearances insure proper air flow. All air vents must be
unobstructed and free of debris.
DO NOT install the CLIM8ZONE TM unit indoors.
It is recommended that the CLIM8ZONE unit be installed
TM
no more than 6.5 feet (2 meters) from the Hot Tub.
4"
_____
80mm
99"
________
2500 mm
Figure 3
Balboa Water Group | Your Single Source Solution
unit.
12"
______
300mm
20"
______
500mm

COMPATIBILITY

CLIM8ZONE is compatible with
TM
the following spa controls.
BP CONTROL SYSTEMS
The CLIM8ZONE unit is compatible with BP Control
TM
Systems that have one of the following agency prefixes:
BP20, BP21, BP501, BP6, BP2, BP1. The agency prefix is
noted on the control system identification label
BP Control System
Identification label
AGENCY PREFIX
The agency prefix
is noted on the
identification label,
which is on the top
surface of the system
pack. In this example
the agency prefix
is BP20.
BP Control System
9
CONTROL PANELS
SpaTouch 3 SpaTouch 3 Mini
TM TM
(Launching in 2022)
TP700
Updated BP Control System
software and control panel software
is required for CLIM8ZONE
TM
Please visit us at
www.BalboaWaterGroup.com
INSTALLATION GUIDE 42391 Rev A
TM