Condensation Drain - Balboa Clim8zone Installation Manual

28
Figure 14
A
CLIM8ZONE Unit
TM
Install condensation
hose
The CLIM8ZONE TM
unit (figure 14, A) has a
Condensation condensation drain spout as
Drain Spout shown here.
A hose clamp and condensation
hose are supplied for drainage.
Hose Clamp
Condensation Hose
As much as 3+ liters of condensation per
hour may flow from the end of the hose.
Make sure the end of the hose has proper
drainage, so water does not collect around
the CLIM8ZONE unit. Condensation is
TM
normal and is not a water leak.
Balboa Water Group | Your Single Source Solution
1
Install the hose and hose
clamp over the drain spout
as shown here.
2
Tighten the hose clamp
with a Philips head screw
driver to secure the hose in place
and create a water tight fit.
NOTES
29
INSTALLATION GUIDE 42391 Rev A
TM