Timer Mode - Clifford RSX3.2 Owner's Manual

T T o o a a c c t t i i v v a a t t e e s s h h o o r r t t - - r r u u n n / / t t u u r r b b o o : :
1. Park the vehicle and set parking
2. Remove your foot from the brake pedal and leave the engine
running.
3. Press and release the
4. The remote start responds with remote start tones and the
Yellow LED is illuminated for 3-seconds.
5. The lights will flash to indicate the remote start has entered
short run turbo mode.
5. Turn off the key, the engine will keep running.
6. Exit and secure the vehicle.
7. The engine will turn off after the programmed run time.
The remote responds with remote start tones and the Yellow
LED illuminates for 3-seconds.
➜

timer mode

By pressing the remote
lights will flash 4 times and then start the vehicle and run for the
set duration. The remote start can be shut off by the 2-way
remote by pressing the remote start button
remain in timer mode, but if any other shut down zones or the
ignition become active the timer mode will cancel.
1. Press Timer mode buttons.
2. The vehicle will confirm with 4 parking light flashes.
3. After a 1-second delay the vehicle will start.
© 2005 directed electronics—all rights reser ved
and buttons at the same time.
and buttons the parking
twice and
27