Turbo Timer Mode - Clifford 4606X Owner's Manual

For Pit Stop or Turbo Timer mode (to leave the engine running
after locking), open the driver door.
Release the foot brake. As long as the engine is running there is
2.
no time limit to perform this step.
Within 20 seconds of foot brake release, press any command
3.
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.
4. The parking lights flash 5 times to confirm MTS mode is enabled
and the remote start activates the ignition outputs.
Turn Off and remove the key from the ignition switch, the engine
5.
remains running.
Exit the vehicle, close all the doors and lock the system.
6.
7. The engine turns off. If the door is opened in Step 1 then the
engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
With the engine running, set the parking brake.
1.
Press the optional dash mounted activation button or perform the
2.
Timer Mode command.
3. The parking lights turn on and the remote start activates the igni-
tion outputs.
Turn Off and remove the key from the ignition switch, the engine
4.
remains running.
Exit the vehicle, close all the doors and lock the system.
5.
6. The engine runs for the Turbo Mode runtime.
© 2013 Directed. All rights reserved.
19