Turbo Timer Mode - Clifford 470.4X Owner's Manual

Remote start and keyless entry system
Table of Contents

Advertisement

Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command from the Advanced Start menu
screen).
4.
The parking lights flash 5 times to confirm MTS mode en-
able and the remote start activates the ignition outputs. The
REMOTE START ON
Turn Off and remove the key from the ignition switch, the engine
5.
remains running.
Exit the vehicle, close all the doors and Lock the system.
6.
7.
The engine turns off and after a few seconds, the
message plays to confirm. If the door is opened in Step 3 then
the engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
With the engine running, set the parking brake.
1.
Within 20 seconds, press the optional dash mounted activation
2.
button or perform the Timer Mode command.
3.
The parking lights turn on and the remote start activates the igni-
tion outputs. The
Turn Off and remove the key from the ignition switch, the engine
4.
remains running.
Exit the vehicle, close all the doors and Lock the system.
5.
6.
The engine runs for the Turbo Mode runtime.
Note
Turbo Timer must be turned on by an authorized Directed
dealer.
© 2011 Directed Electronics. All rights reserved.
text and beeps play to confirm.
REMOTE START ON
REMOTE START OFF
text and beeps play to confirm.
33

Advertisement

Table of Contents
loading

Table of Contents