Turbo Timer Mode - Clifford 590.4X Owner's Manual

screen).
4. The vehicle lights flash 5 times to confirm MTS mode en-
able and the remote start activates the ignition outputs. The
REMOTE START ACTIVATED
Turn Off and remove the key from the ignition switch, the engine
5.
remains running.
Exit the vehicle, close all the doors and arm the system.
6.
7. The engine turns off and after a few seconds, the
REMOTE START DEACTIVATED
opened in Step 3 then the engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
With the engine running, set the parking brake.
1.
Within 20 seconds, press the optional dash mounted activation
2.
button or send the Timer Mode command from the Advanced
Start menu screen.
3. The vehicle lights turn on and the remote start activates the igni-
tion outputs. The
play to confirm.
Turn Off and remove the key from the ignition switch, the engine
4.
remains running.
Exit the vehicle, close all the doors and arm the system.
5.
6. The engine runs for the Turbo Mode runtime.
Note Turbo Timer must be turned on by an authorized Directed
dealer.
© 2011 Directed Electronics. All rights reserved.
animation and beeps play to confirm.
message plays to confirm. If the door is
REMOTE START ACTIVATED
animation and beeps
43