Removing The Camera - Bosch FLEXIDOME panoramic 5100i IR Installation Manual

20 en | Installation
4.
5.3

Removing the camera

Follow the below steps in case the camera needs to be removed or opened:
1.
2.
3.
4.
5.
Notice!
The box comes with the mounting plate, camera base and camera dome cover separated. In
i
case you click the mounting plate into the camera base, place one finger in the center hole of
the mounting plate, and hold the camera base with the other hand. Then give an instant pull
to the mounting plate to release the two click hooks on the mounting plate.
2022-01 | V01 | F.01U.385.630
Remove the protective foil.
Untighten the three captive screws in the camera.
Disconnect the Ethernet cable.
Take out the grommets.
Hold the camera base and give it a sudden snap to release the click hooks.
Remove the camera.
Installation manual
FLEXIDOME panoramic 5100i IR
Bosch Security Systems B.V.