Introduction; Parts List - Camera; Additional Products Required - Bosch MIC inteox 7100i Installation Manual

8 en | Introduction
2

Introduction

–
–
–
–
Caution!
Take extra care lifting or moving MIC cameras because of their weight.
!
The MIC packaging is designed:
–
–
2.1

Parts List - Camera

Quantity
1
1
1
1
1
1
1
2.2

Additional Products Required

Quantity
* Refer to the chapter Preparing Wiring.
2021-03 | 1.2 |
This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Sales or Customer Service Representative from Bosch Security
Systems.
Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
The original packing carton (if undamaged) is the safest container in which to transport
the unit and must be used if returning the unit for service. Save it for possible future use.
to allow installers to configure the camera inside the shipping box.
to provide a temporary table-top or desk-top stand.
Component
MIC inteox 7100i camera
spanner tool [to remove and to attach the yoke caps in order to cant the
camera if desired, and to remove the access plug from the camera head
when installing the optional illuminator accessory (sold separately)]
base gasket
RJ45 coupler
MAC address labels
Quick Installation Guide
Safety instructions
Item
100 m Ethernet cable (Cat5e or better)
maximum
* Power cable (24 VAC)
* Alarm wiring as needed
* Audio wiring as needed
1 microSD card (maximum 32 GB (microSDHC) / 2 TB (microSDXC)) (user-
supplied)
Installation Manual
MIC inteox 7100i
Bosch Security Systems