Safety; Safety Message Explanation; Safety Precautions; Important Safety Instructions - Bosch FLEXIDOME panoramic 5100i IR Installation Manual

4 en | Safety
1

Safety

Read, follow, and retain for future reference all of the following safety instructions. Follow all
warnings before operating the device.
1.1

Safety message explanation

In this manual, the following symbols and notations are used to draw attention to special
situations:
Danger!
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Warning!
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
!
Caution!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
!
injury.
Notice!
i
Indicates a situation which, if not avoided, could result in damage to the equipment or
environment, or data loss.
1.2

Safety precautions

Caution!
Installation should only be performed by qualified service personnel in accordance with the
!
National Electrical Code (NEC 800 CEC Section 60) or applicable local codes.
1.3

Important safety instructions

–
–
–
–
–
–
–
–
–
–
–
2022-01 | V01 | F.01U.385.630
To clean the device, do not use liquid cleaners or aerosol cleaners.
Do not install the device near any heat sources such as radiators, heaters, stoves, or
other equipment (including amplifiers) that produce heat.
Do not spill liquids on the device before installation is completed.
Take precautions to protect the device from power and lightning surges.
Adjust only those controls specified in the operating instructions.
Operate the device only from the type of power source indicated on the label.
Unless qualified, do not attempt to service a damaged device yourself. Refer all servicing
to qualified service personnel.
Install in accordance with the manufacturer's instructions in accordance with applicable
local codes.
Use only attachments/accessories specified by the manufacturer.
Protect all connection cables from possible damage, particularly at connection points.
When using a Class I adapter with your product, the power cord shall be connected to a
socket-outlet with a connection to ground.
Installation manual
FLEXIDOME panoramic 5100i IR
Bosch Security Systems B.V.