Remote Programming Procedure - ADS FlashLogic VWX Product Manual

01
WARNING: Complete the module
[4x]
programming procedure and tach
programming procedure before programming
the remotes. A maximum of four [4x] remotes
per system.
02
Set ignition to ON position.
OFF ACC ON START ON
ENGINE
START
STOP
03
Press and release the antenna button, then
press and hold the antenna button. The
antenna's leds will turn solid BLUE.
04
Parking Light will fl ash once [1x].
05
Press once [1x] on the LOCK button of each
remote.
06
The antenna's leds will fl ash BLUE once [1x]
for each successful pairing.
Patent No. US 8,856,780 CA 2759622
Automotive Data Solutions Inc. © 2022
REMOTE PROGRAMMING PROCEDURE - 1 OF 1
07
Release the antenna button. The antenna's
leds will turn OFF.
08
Set ignition to OFF position.
OFF OFF ACC ON START
ENGINE
START
STOP
09
Remote Programming Procedure completed.
_________________________________
>>
To program an additional remote as second
vehicle mode: Follow steps 1 to 4. Press twice
F
[2x] on the "F" button then press once [1x] on
the LOCK button of the remote. Follow steps
6 to 9.
_________________________________
>>
Please visit www.idataguides.com to see all of
our remote user manuals
_________________________________
VWX
PAGE 14 OF 15
• 20220113
VWX Product Guide
www.idatalink.com