Programming A New Remote; Replacing Remote Batteries - ADS TR1150AT Owner's Manual

COMMAND
BUTTON
DESCRIPTION
TURBO ON/OFF
COMMAND
BUTTON
DESCRIPTION
WEATHER START ON/OFF
COMMAND
BUTTON
DESCRIPTION

PROGRAMMING A NEW REMOTE

Are you replacing a lost or damaged remote or simply adding an extra remote to your iDatastart system?
Please take note of the following:
1. A functional iDatastart system must already be installed in your vehicle.
2. All new remotes must be installed by an iDatastart Authorized Dealer.
3. A maximum of 4 remotes can be programmed to your iDatastart system.

REPLACING REMOTE BATTERIES

Follow the steps below to replace the batteries in your iDatastart remotes*.
Passive Lock & Arm ON/OFF
Automatically locks and arms your vehicle 60 seconds
after you unlock it.
Turbo ON/OFF
Cools down your turbo before turning the engine off.
Programmable runtime from 30 seconds to 4 minutes.
Weather Start ON/OFF
Sets your vehicle to automatically remote start every
2, 3 or 4 hours (programmable) or from a temperature
sensor sold separately.
2022-03-23 © Automotive Data Solutions Inc. 7/15
TR1150AT