Advertisement
Quick Links
FLI-CH(RS)-CH4-[FLRSCH4]-EN
TERMS OF USE: Automotive Data Solutions Inc. ("ADS") products are strictly intended for installation by
Certified Technicians who are employed by a registered business specialized in the installation of auto-
motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle,
it is the Certified Technician's responsibility to review the most current Product Guide, Install Guide
and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever,
including but not limited to any consequential damages, incidental damages, damages for loss of time,
loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or
may not have resulted from the use, misuse, improper installation or operation of its products. ADS
reserves itself the right to suspend any Weblink® account without notice and decline to offer technical
support to non-Certified Technicians, non-compliant Certified Technicians or end users.
Patent No. US 8,856,780 CA 2759622
Automotive Data Solutions Inc. © 2020
INSTALL GUIDE
DOCUMENT NUMBER
70095
REVISION DATE
20200320
FIRMWARE
FLI-CH(RS)-CH4-[FLRSCH4]
HARDWARE
FLRSCH4
ACCESSORIES
FLPROG (REQUIRED)
FLRF1/2/4 (OPTIONAL)
CARLINK ASCL2 (OPTIONAL)
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
www.flashlogic.com
Advertisement
Related Manuals for ADS FLASHLOGIC FLRSCH4
Summary of Contents for ADS FLASHLOGIC FLRSCH4
- Page 1 ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
- Page 2 PAGE 2 OF 20 VEHICLE LIST - 1 OF 1 • 20200320 DOC.: #70095 FEATURES 300 AT 08-10 1 • • • • • • • • • • • • • • • • 300 Limited AT 08-10 1 •...
- Page 3 PAGE 3 OF 20 BOX CONTENTS - 1 OF 1 • 20200320 DOC.: #70095 BOX CONTENTS MODULE T-HARNESS 1 10 PIN CONNECTOR LED 2 PROGRAMMING BUTTON LED 1 BLUE 12 PIN CONNECTOR BLACK RF PORT/ WEBLINK PORT BLUE BLACK TELEMATIC PORT AFTERMARKET HOOD SWITCH AND CABLE BLACK...
- Page 4 PAGE 4 OF 20 COMPATIBLE ACCESSORIES - 1 OF 1 • 20200320 DOC.: #70095 RF KIT (accessories sold separately) FLRF1/2/4 RF KIT (NC) MODULE RF PORT ANTENNA TELEMATIC KIT (accessories sold separately) FLHRNTM CARLINK MODULE TELEMATIC PORT (NC) TELEMATIC KIT (accessories sold separately) FLHRNTM PN 4120260 CAR CONNECTION...
- Page 5 PAGE 5 OF 20 TYPE 1 - WIRE CHART - 1 OF 2 • 20200320 DOC.: #70095 Parking Light D2242 Black 10 pin White/Brown (MUX) Switch 08-10 Driver Door Pin Purple Driver kick panel Parking Light D2242 Black 10 pin White/Brown (MUX) Switch...
- Page 6 PAGE 6 OF 20 TYPE 1 - WIRE CHART - 2 OF 2 • 20200320 DOC.: #70095 Parking Light Pin #1 of relay #7 Power module in engine compartment Commander 08-10 Driver Door Pin Purple Driver kick panel Parking Light Pin #1 of relay #7 Power module in engine compartment Grand cherokee...
- Page 7 PAGE 7 OF 20 TYPE 1 - WIRING DIAGRAM - 1 OF 1 • 20200320 DOC.: #70095 IGNITION SWITCH IGNITION CONNECTOR RF PORT/WEBLINK PORT TELEMATIC PORT IGNITION HARNESS WHITE/GREEN (NC) IF VEHICLE IS EQUIPPED WITH PARKING LIGHT ( IF VEHICLE IS EQUIPPED WITH PARKING LIGHT (MUX) WHITE/RED (NC) PARKING LIGHT (MUX) WHITE/BROWN...
- Page 8 PAGE 8 OF 20 MODULE PROGRAMMING PROCEDURE - STD KEY - 1 OF 1 • 20200320 DOC.: #70095 Close driver door. Turn key to OFF position. START Re-open driver door to wake up data bus. Remove key. START Insert key into ignition. Press UNLOCK on the OEM remote.
- Page 9 PAGE 9 OF 20 MODULE PROGRAMMING PROCEDURE - PTS - 1 OF 1 • 20200320 DOC.: #70095 Close driver door. Press UNLOCK on the OEM remote. Re-open driver door to wake up data bus. Wait, LED will turn solid GREEN for 2 seconds. DO NOT PRESS BRAKE PEDAL.
- Page 10 PAGE 10 OF 20 VALET MODE PROGRAMMING PROCEDURE - 1 OF 1 • 20200320 DOC.: #70095 >> >> NOTE: In Valet Mode, the Remote starter is not To exit valet mode: repeat steps 1 to 5. functional. Keyless entry, Lock and Unlock will remain functional.
- Page 11 PAGE 11 OF 20 AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1 • 20200320 DOC.: #70095 >> WARNING: Program aftermarket remotes LED 1 will fl ash GREEN once [1x]. before usage. A maximum of four [4x] aftermarket remotes per system. Time restriction.
- Page 12 PAGE 12 OF 20 MODULE NAVIGATION PROCEDURE - 1 OF 1 • 20200320 DOC.: #70095 >> It is mandatory to exit the Module Navigation TO ACCESS THE OPTIONS: Press and hold To save and return to the OPTIONS: Press and at the end of this procedure.
- Page 13 PAGE 13 OF 20 MODULE NAVIGATION CHART - 1 OF 2 • 20200320 DOC.: #70095 MODULE NAVIGATION CHART: NOTES I Default settings are listed in bold. DISARM/UNLOCK BEFORE START II Make sure the option is covered on the vehicle before attempting to change the setting.
- Page 14 PAGE 14 OF 20 MODULE NAVIGATION CHART - 2 OF 2 • 20200320 DOC.: #70095 MODULE NAVIGATION CHART: NOTES DOUBLE LOCK LOCK + UNLOCK HORN EVENT TRIGGER LOCK + UNLOCK + START CONFIGURATION DOUBLE LOCK + START 30 mSEC HORN CHIRPS WIDTH 15 mSec 60 mSec 02-07 Technical Support only...
- Page 15 PAGE 15 OF 20 REMOTE STARTER ERROR CODES - 1 OF 1 • 20200320 DOC.: #70095 REMOTE STARTER ERROR CODES: NOTES Engine running. I WARNING: The following applies only when the parking lights are connected and supported by the system. Key in ignition at ON position.
- Page 16 PAGE 16 OF 20 MODULE DIAGNOSTICS - 1 OF 1 • 20200320 DOC.: #70095 TEST MODULE Flashing RED Missing/wrong information from fi rmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. DURING PROGRAMMING Solid GREEN then OFF Module correctly programmed.
- Page 17 PAGE 17 OF 20 MODULE RESET PROCEDURE - 1 OF 1 • 20200320 DOC.: #70095 Disconnect all connectors from module except Reconnect all connectors. the BLACK 20-PIN connector. Disconnect the BLACK 20-PIN connector. Repeat programming procedure. >> PRESS AND HOLD the module’s programming Failure to follow procedure may result with a button while connecting the BLACK 20-PIN DTC or a CHECK ENGINE error message.
- Page 18 PAGE 18 OF 20 TAKEOVER PROCEDURE - STD KEY - 1 OF 1 • 20200320 DOC.: #70095 >> >> All vehicle doors must be closed and locked Failure to follow procedure will result in prior to remote start sequence. vehicle engine shutdown. Press unlock on OEM or aftermarket remote.
- Page 19 PAGE 19 OF 20 TAKEOVER PROCEDURE - PTS - 1 OF 1 • 20200320 DOC.: #70095 >> All vehicle doors must be closed and locked prior to remote start sequence. Press unlock on OEM or aftermarket remote or request switch. DO NOT PRESS BRAKE PEDAL.
- Page 20 PAGE 20 OF 20 INSTALLATION CHECKLIST - 1 OF 1 • 20200320 DOC.: #70095 CHECKLIST WARNING: Vehicle engine will start many times. Test in a well ventilated area. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Close all vehicle doors, hood and trunk.