Programming A New Remote; Replacing Remote Batteries - ADS iDatastart TR3450A Owner's Manual

COMMAND
BUTTON
DESCRIPTION
CONFIRMATION
UNLOCK REMOTE ON/OFF
COMMAND
BUTTON
DESCRIPTION
CONFIRMATION
MUTE REMOTE ON/OFF
COMMAND
BUTTON
DESCRIPTION
CONFIRMATION

PROGRAMMING A NEW REMOTE

Are you replacing a lost or damaged remote or simply adding an extra remote to your iDatastart system?
Please take note of the following:
1. A functional iDatastart system must already be installed in your vehicle.
2. All new remotes must be installed by an iDatastart Authorized Dealer.
3. A maximum of 4 remotes can be programmed to your iDatastart system.

REPLACING REMOTE BATTERIES

Follow the steps below to replace the batteries in your iDatastart remotes*.
Lock Remote
Disables all functions on your remote.
1 chime + 1 flash
Unlock Remote ON/OFF
Enables all functions on your remote.
2 chimes + 2 flashes
Mute Remote ON/OFF
Disables the chime when pressing any button on your
remote.
•1 chime ON
•2 chimes OFF
2023-06-09 © Automotive Data Solutions Inc. 8/15
TR3450A/TR3450AF (v2)