Specifications - Sharp PN-L862B Operation Manual

nProduct Specifications
Model
LCD component
Max. resolution (pixels) 3840 x 2160
Max. colors
Pixel pitch
Brightness (typical)
Contrast ratio (typical)
Viewing angle
Screen active area inch (mm) 74-5/8 (W) x 41-15/16 (H)
Computer input signal
Sync signal
Plug and play
Input Video
terminals
Serial (RS-232C)
Audio
Output Audio
terminals
USB port
LAN terminal
System OS
CPU
Memory
Storage
Wireless LAN
Bluetooth
Expansion slot
Speaker output
Touch Detection method
Panel
Computer connector
Power requirement
Operating temperature * *
2
Operating humidity *
3
Power consumption
(input signal waiting state /
standby mode * / off mode)
4
Dimensions inch (mm)
(excluding protrusions)
lbs. (kg) Approx. 137.8 (62.5)
Weight
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness. This is the brightness of the LCD panel, not the
brightness of the product.
*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*4 When no optional part is attached.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.

Specifications

PN-L862B
86" Class [85-9/16 inch
(217.4 cm) diagonal] TFT
LCD
Approx. 1.07 billion colors
0.4935 mm (H) × 0.4935 mm (V) 0.42975 mm (H) × 0.42975 mm (V) 0.372 mm (H) × 0.372 mm (V)
400 cd/m 2 * 1
1200: 1
178° right/left/up/down (contrast ratio ≥ 10)
(1895.0 x 1066.0)
Analog RGB (0.7 Vp-p) [75 Ω]
Horizontal/vertical separate (TTL: positive/negative)
VESA DDC2B
Mini D-sub 15 pin, 3 rows x 1
HDMI x 3
USB Type-C x 1
D-sub 9 pin x 1
3.5 mm mini stereo jack x 1
3.5 mm mini stereo jack x 1
Digital audio output (optical) x 1
USB 3.0 compliant x 4, USB 2.0 compliant x 1
10 BASE-T/100 BASE-TX/1000 BASE-T
Android 9.0
Arm Cortex-A73 processor (Quad-Core)
4GB
32GB
IEEE802.11ax/ac/n/a/g/b compliant
5.0 compliant
Supported protocols: A2DP, AVRCP, GATT, HID
20 V, 3.25 A (power supplied when expanding the functions with an optional part)
10 W + 10 W
Infrared blocking detection method
USB (3.0 compliant) (Type B) x 2
AC 100 - 240 V, 5.3 A,
50/60 Hz
41°F to 95°F (5°C to 35°C)
3
20% to 80% (no condensation)
470W
(20W/0.5W/0.0W)
Approx. 77-1/16 (W) x 3-3/8
(D) x 45-5/8 (H) (1957 x 85.7
x 1159.5)
PN-L752B
75" Class [74-1/2 inch
(189.3 cm) diagonal] TFT
LCD
5000: 1
64-15/16 (W) x 36-9/16 (H)
(1650.2 x 928.3)
AC 100 - 240 V, 4.6 A,
50/60 Hz
400W
(20W/0.5W/0.0W)
Approx. 67-5/16 (W) x 3-3/8
(D) x 40-1/8 (H) (1709.4 x
85.7x 1019.8)
Approx. 109.1 (49.5)
PN-L652B
65" Class [64-1/2 inch
(163.9 cm) diagonal] TFT
LCD
4000: 1
56-1/4 (W) x 31-5/8 (H)
(1428.5 x 803.5)
AC 100 - 240 V, 3.7 A,
50/60 Hz
330W
(20W/0.5W/0.0W)
Approx. 58-5/8 (W) x 3-3/8
(D) x 35-5/16 (H) (1488.4 x
85.5 x 896.6)
Approx. 80.5 (36.5)
57
E