Sharp PN-L862B Operation Manual page 13

9. Audio output terminal
• The output sound varies depending on the input mode.
• The volume of the output sound can be fixed by setting
"Audio Output" of "Input & Output" on the Administrator
Settings menu.
• It is not possible to control the sound output from the
audio output terminals with the Audio menu.
10. Digital audio output (optical) terminal
• Audio that is input into the monitor is output.
• Connect using a commercially available audio digital
cable.
• The output sound varies depending on the input mode.
11. RS-232C input terminal
• You can control the monitor from a computer by
connecting a commercially available RS-232 straight
cable between these terminals and the computer.
12. LAN terminal
• You can connect to a network by using a commercially
available LAN cable.
13. USB port (USB3.0 compliant, Type-A)
• When the input mode is HDMI1 or HDMI2, the USB port
can be used for a computer connected to the TOUCH
PANEL1 terminal.
• When the input mode is HDMI3 or D-SUB, the USB port
can be used for a computer connected to the TOUCH
PANEL2 terminal.
• When the input mode is APPLICATION, the USB port can
be used for APPLICATION mode.
Caution
• Do not switch the input mode when a USB flash drive is
connected. This could corrupt the data on the USB flash
drive. Switch the input mode after removing the USB flash
drive. To save data to the USB flash drive, connect the USB
flash drive to the USB port (USB2.0 compliant, Type-A).
14. USB port (USB2.0 compliant, Type-A)
• The USB port can be used for APPLICATION mode.
Connecting Peripheral Equipment
n USB port for the APPLICATION mode
• Connect USB devices (memory device, keyboard, mouse)
that you want to use in "APPLICATION" mode.
Supported USB flash drives
File System FAT32/NTFS (Read only)
Up to 64 GB
Capacity
(For FAT32, the maximum file size is
4 GB)
• A USB flash drive that is encrypted or has a security
function cannot be used.
• Use a USB flash drive with a shape that can be inserted in
the USB port. Some USB flash drives with special shapes
cannot be inserted. Do not forcibly insert a USB flash drive.
This may damage the connector or cause failure.
TIPS
• You can prohibit the use of USB flash drive. (See page 46.)
n How to remove a USB flash drive
1. Start "File Explorer". (See page 38.)
2. Select the USB flash drive to remove, and then touch
.
TIPS
• To remove a USB flash drive connected to a computer,
refer to the manual of the computer.
13
E