Table of Contents
Advertisement
Installation
Warning!
• It is dangerous to alter the
specifications or attempt to
modify the appliance in any way.
• This appliance is heavy. Care
should be taken when moving it.
• Care must be taken to ensure
that the appliance does not stand
on the electrical supply cable.
• Any electrical or plumbing work
required to install this appliance
must be carried out by a qualified
electrician or plumber.
Unpacking
• Remove all packaging before positioning the
appliance.
• Position the appliance next to a water tap and a
drain.
Levelling of the appliance
Good levelling is essential for correct closure
and sealing of the appliance door. When the
appliance is correctly levelled, the door will not
catch on either side of the cabinet. If the
appliance door does not close correctly, loosen
or tighten the adjustable feet until the level of
the appliance is perfect.
Caution! Carefully follow the
instructions on the enclosed
template for building in the
appliance and fitting the
furniture panel.
Dishwasher User Manual
Insert the appliance after the adjustment of the
appliance level. When inserting the appliance,
ensure that the water inlet and drain hoses are
not kinked or squashed. During all operations
that involve accessibility to internal components
the appliance must be unplugged. Be sure that
once the appliance has been installed, it is easily
accessible for the service engineer in the event
that a repair is required.
Fixing to the adjacent units
The appliance must be secured against tilting.
Therefore make sure, that the counter it is fixed
under, is suitably secured to a fixed structure
(e.g. adjacent kitchen unit cabinets, wall).
7
Advertisement
Table of Contents
