Setting And Starting A Programme - John Lewis JLBIDW917 User Manual

Setting and starting a
programme
The Auto off function
This function decreases energy consumption by
deactivating automatically the appliance when it
is not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has not
started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
3. Press the button related to the chosen
programme.
The display shows the programme duration.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
Starting a programme with delay start
1. Set a programme.
2. Press Delay start again and again until the
display shows the delay time you want to set
(from 1 to 24 hours).
The delay indicator comes on.
3. Close the appliance door to start the
countdown.
While a countdown is running it is possible to
increase the delay time but not to change the
selection of the programme and options.
When the countdown is completed, the
programme starts.
Opening the door while the appliance
operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration.
After closing the door, the appliance continues
from the point of interruption.
22
If the door is opened for more than
30 seconds during the drying
phase, the running programme
ends. It does not happen if the
door is opened by DryAssist
function.
Do not try to close the appliance
door within 2 minutes after
DryAssist automatically opens it, as
this may cause damage to the
appliance.
If, afterwards, the door is closed
for another 3 minutes, the running
programme ends.
Cancelling the delay start while the
countdown operates
When you cancel the delay start you have to set
the programme and options again.
Press and hold simultaneously Eco and Auto until
the appliance is in programme selection mode.
Cancelling the programme
Press and hold simultaneously Eco and Auto until
the appliance is in programme selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a new
programme.
End of the programme
When the programme is completed the display
shows 0:00.
All buttons are inactive except for the on/off
button.
1. Press the on/off button or wait for the Auto
off function to automatically deactivate the
appliance.
If you open the door before the activation of
Auto off, the appliance is automatically
deactivated.
2. Close the water tap.
Dishwasher User Manual