Start To Use; Turn On/Off - Philips VideoTracer VTR8202 User Manual

4 Start to Use

4.1 Turn ON/OFF

Notice
• Please recharge the device for three hours before using it
for the first time!
During shutdown mode, long press the "Turn ON" button
for 3 seconds, and the device will be turned on, showing the
Philips logo, as shown below:
Then the device enters the preview interface, as shown in
the fi gure below. In the preview state, the working indicator
lights up in green. On this interface, press the "Menu" button
and the device returns to the setting interface. Long press
" " or " " to zoom out or in on the preview interface for
digital zoom.
Notice
• This device is powered by a non-removable lithium
battery. If you do not use the audio and video recorder
for a long time, long press the "Power" button for 3
seconds to turn off the device.
• If the record does not work properly, please check if the
device is out of power.
• During the operation please do not pull out the external
memory card. Otherwise, damage might be caused to
the files or the device.
• When the battery sign shows "
your device in time.
" , please charge
EN 41