NW-ZX505/ZX507
2-14. HP SE ASSY (STEREO MINI), SUPPORT BATTERY ASSY-3
guide line
–
rear panel
spacer
Note 1: When installing the step screws,
make sure to install this step screw first.
knob
9 HP SE assy
(HOLD switch)
0 jack cushion
guide
jack
line
cushion
–
–
37
guide line
Be careful following points when bending of the KEY FPC, installing to the connector.
Don't press with the nails of the fingertip or bend with the tweezers.
When connecting the KEY FPC to the connector, press the center of the connector.
Check the connector of the KEY FPC is completely locked or connected.
–
5 screw (B1.4)
top side
top side
4 step
screw
4 step screw
(See Note 1)
battery support block
6 Lift up the battery
support block in the
direction of the arrow.
8 battery support block
Note 2: When installing the
7
switch
2 KEY FPC connector
(L = 4.0 mm)
top side
4 step
screw
4 step screw
rear panel
spacer
top side
knob
(HOLD switch)
battery support block,
align the switch and
knob (HOLD switch).
Slide the knob
(HOLD switch)
in the direction
of the arrow.
bottom
side
qa support battery
assy
Sony CONFIDENTIAL
For Authorized Servicer
1 rear panel spacer
(See Fig. A)
3 three screws M1.4
(L = 4.0 mm)
front side
guide line
–
switch
bottom side
Slide the switch
in the direction
of the arrow.
switch
battery support block
knob (HOLD switch)
Align the switch and knob (HOLD switch),
and then install the battery support block.
1 rear panel
spacer
(See Fig. B)
3 screw M1.4
(L = 4.0 mm)
bottom side
guide line
–
bottom side
SYS SET