NW-ZX505/ZX507
2-4.
REAR PANEL BLOCK-2
Note: About the tool to be used, refer to "Tool for disassembling" in "JIG" on page 23.
tool for disassembling, etc.
5 Lift the rear panel block in the
direction of the arrow, and insert
a tool for disassembling, etc. into
the gap.
rear panel block
bottom side
Attach in order from 1 to 2.
1 Align the top sides of the rear panel
block and cabinet block.
rear panel block
27
top side
front side
8 Move the tool for
disassembling, etc.
to the center.
9 Push the rear panel block
in the direction of the arrow.
0 Unlock the rear panel spring D.
(perform steps 3 to 4)
(See Page 26)
top side
rear panel spring
cabinet block
front side
6 Unlock the rear panel spring B.
(perform steps 3 to 4)
(See Page 26)
qa rear panel block
2 Press in the rear panel spring
areas (four places total).
rear panel spring
bottom side
rear panel spring
Sony CONFIDENTIAL
For Authorized Servicer
7 Unlock the rear panel spring C.
(perform steps 3 to 4)
(See Page 26)
rear panel spring
front side
SYS SET