Sony SRP-L300 Operating Instructions Manual page 33

8-3. Using the Store Program
The store function is used to assign a name to the contents of a temporary program and
memorize it in the internal memory.
After the store operation is selected, do the following procedure.
SELECT
− +
PUSH ENTER/YES
SELECT
− +
PUSH ENTER/YES
SELECT
− +
PUSH ENTER/YES
Overwrite execution Overwrite stop
SELECT
− +
PUSH ENTER/YES
P01 DYNAMICS(A)
U01 User01
CH-1
CH-2
- 30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
P01 DYNAMICS(A)
U02 --------
CH-1
CH-2
- 30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
P01 DYNAMICS(A)
U02 User- 0 ISC CH-1
CH-2
- 30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
Overwrite?
U02 User02
CH-1
CH-2
-
30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
EXIT/NO
U02 User02 (A)
STORE Complete! CH-1
CH-2
- 30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
The program number that can be stored blinks (in the
rower line) when "PROGRAM STORE" is selected.
The program that can be stored is a user program in
which no program protection has been set.
Turn the "SELECT" knob to display the number to be
stored.
The name displayed together with a number indicates
that a program has been already stored under the
number.
If the number you wish to store is displayed, press the
"SELECT" button.
After the number selection is completed, assign
a name to it.
Eight alphanumeric characters can be assigned as
the name.
The program name when a program is recalled is
displayed first. Change one character at a time
using two knobs.
1 Turn the "SELECT" knob clockwise or
counterclockwise.
>The cursor position moves.
2 Turn the "ADJUST" knob clockwise or
counterclockwise.
>The character in which the cursor is put is
changed.
3 Press the "ADJUST" button.
>The current characters are cleared. A
space (blank) then occurs.
After all characters are entered, press the "SELECT"
button.
If a program has been already stored with that
number, a message on whether to delete the previous
program by overwrite is displayed.
To overwrite the previous program, press the
"SELECT" button.
(To stop the overwrite operation, press the "EXIT"
button. The program number selection state is then
returned.)
No confirm message is displayed if the overwrite
operation is not performed.
After the store operation is completed, message
"STORE Complete!" is displayed for about four
seconds. The default state is then returned.
The program name and name displayed in the default
state is used as a newly stored number and name.
33