Sony SRP-L300 Operating Instructions Manual page 32

8-2. Using the recall program
SELECT
− +
PUSH ENTER/YES
SELECT
− +
PUSH ENTER/YES
Recall execution
SELECT
− +
PUSH ENTER/YES
32
The recall function is used to recall and execute the programs stored in memory as a
temporary program.
After the recall operation is selected, do the following procedure.
P01 DYNAMICS(A)
PROGRAM RECALL
- 30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
P02 DAL-1000(A)
SURE? (RECALL)
- 30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
Recall stop
EXIT/NO
P02 DAL-1000(A)
RECALL Complete!
- 30 27 24 21 18 15 12 9 6 3 1 OVER/GR(dB)
Note
The existing temporary program is deleted when the recall operation is executed.
When message "SURE (RECALL)?" is displayed, reconfirm whether to delete the program
and store it as required.
The program number blinks when "PROGRAM
RECALL" is selected.
CH-1
CH-2
Turn the "SELECT" knob to select the program
number to be recalled.
Press the "SELECT" button to determine the program
when the program you wish to recall is displayed.
CH-1
CH-2
Message "SURE (RECALL)?" is then displayed in the
lower low.
To execute the selected recall, press the "SELECT"
button.
(To stop the recall operation, press the "EXIT" button
and return to the program number selection.)
After the recall operation is completed, the temporary
program is changed and message "RECALL
CH-1
CH-2
Complete!" is displayed for about 4 seconds. After
that, the default state is returned.