CDA HCG 731 Series Installation & Use Manual page 14

14
Applying the Seals
– Turn the cooktop upside down.
– Spread the longer seal "A" around the left, rear and right sides as shown in figure 15a.
– With a cutter or a scissors cut the excess seal "C" and retain it for next use (figure 15b).
– Spread the seal "B" around the left, front and right edges of the cooktop as shown in figure 15c.
– Spread the seal "C" along the rear edge of the cooktop as shown in figure 15d. Making sure that the
beginning and the end overlap at the seal "B" (see figure 15e).
Fig. 15a Fig. 15b Fig. 15c Fig. 15d
seal C
seal B
seal C
seal A
seal C
seal B
seal A
Fig. 15e