Key Function - Electrolux AEG DD9996-B Operating And Installation Instructions

�
� �

Key Function

A
Upper panel closed: when pressed for about two sec-ond it
opens the upper panel. It switches the motor on at the latest
selected speed.Upper panel open: when shortly pressed it
switches the motor and the lights on/off. It stops all function
and closes the panel
B
Decreases the suction speed.
C
Increases the suction speed.
D
Functioning only when the upper panel is open. This speed
has been timed at 10 minutes. After that time the system ac-
tivates automatically the latest selected speed. The function
is suitable for cooking conditions when vapours and smells
are of the at most emission.
E
Functioning only when the upper panel is open. By pressing
this key it is possible to set up the motor to a suction speed
at 100 m3/h .
F
Functioning only when the motor is on. By pressing this key
it is possible to set the delayed shutdown of the motor and
the lighting to 30 minutes.
G
By pressing this key for about 2 seconds it is possible to reset
the filter saturation alarm.
H
By pressing this key the intensity of the lighting sys-tem can
be modified up to five levels.
I
It switches the lights on and off (at maximum speed) inspite
of the panel's position.
L
Upper panel closed: when pressed for about two sec-ond it
opens the upper panel .Upper panel open: when pressed for
about two second it switches off motor and lights resetting
every acti-vated function, and closes the panel.
Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The motor and
lights are switched off, and upper panel can be open or closed.By pressing the D-key for about 5 secon-
ds the keyboard block can be activated or deactivated. This function is confirmed by a Beep and by an
animation on the display.
OPERATING INSTRUCTIONS
�
�
�
Display
Indicates the selected speed.
Number of lit LEDS decreases.
Number of lit LEDS increases.
I flashes and all the LEDS on the display are lit.By pressing
the key the function is deacti-vated.
24–symbol appears and the LEDS on the display go off
cyclically, one by one. By pressing the key the function is
deacti-vated.
A flashing clock symbol appears. By pressing the key the
function is deacti-vated.
A drop symbol indicates that the metal grease filters satu-
ration alarm has been activated, and the filters need to be
washed. The alarm is triggered after 100 working hours. C
indicates that the charcoal filter satura-tion alarm has been
activated, and the filter has to be replaced. The alarm s
triggered after 200 working hours.
5
�
�
�
�