Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux AEG DD9663-M UK
Summary of Contents for Electrolux AEG DD9663-M UK
- Page 1 DD9663-M UK DD9693-M UK Cooker Hood Operating and Installation Instructions...
- Page 2 Thank you for buying an AEG product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before using the appliance and retain for future reference. If you require guidance in the use of the appliance or require further infor- mation on AEG Products, please contact our Customer Services Department.
-
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Services Department. -
Page 4: Your Appliance
YOUR APPLIANCE... - Page 5 OPERATING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. Function Display Turns the Lighting System on and off. On or Off Turns the Motor on and off. On or Off Activates speed one.
-
Page 6: Recirculation Mode
OPERATING INSTRUCTIONS This cooker hood can be used to recirculate or extract contaminated air. Recirculation Mode The cooker hood is supplied specified for use in the recir- culation mode with the charcoal filter fitted. ���� ��� The contaminated air is cleaned by passing through the filters and than back into the kitchen. -
Page 7: Maintenance And Cleaning
MAINTENANCE AND CLEANING Before carrying out any maintenance or lean- ing isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. External Cleaning The metal casing, grille and chimney should be cleaned at least once a month to keep it looking like new. -
Page 8: Charcoal Filters
MAINTENANCE AND CLEANING Alarm signal reset • Turn the Lights and the Suction motor off. • Press button H and hold for at least 2 seconds, confirmation is provided by the fact that the Led goes out. Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. - Page 9 MAINTENANCE AND CLEANING Changing the Halogen Spot Lamp • Extract the lamp from the lamp holder by pulling gently. • Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. Replacement filters and light bulbs can be obtained from your local Service Force Centre.
-
Page 10: Something Not Working
SOMETHING NOT WORKING If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start • Check the hood is connected to the electricity sup- ply. -
Page 11: Standard Guarantee Conditions
GUARANTEE CONDITIONS Standard Guarantee Conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG built-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials and carriage on condition that: •... -
Page 12: Installation Instructions
INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical Information DIMENSIONS HEIGHT (CANOPY): 270 mm HEIGHT (CHIMNEY): 500-330 mm WIDTH (CANOPY): 698 - 898 mm WIDTH (CHIMNEY): 300 mm GROSS: 26 kg - 28 kg NET: 17 kg - 20 kg ELECTRICAL SUPPLY: 220-240 V (50 Hz) POWER CONSUMPTION: 370 - 390 W FAN MOTOR:... -
Page 13: Installing The Cooker Hood
INSTALLING THE COOKER HOOD Unpacking Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a Before unpacking the cooker hood position the carton with breakdown. the arrows pointing upwards as illustrated on the carton. All installations must comply with the local The canopy is supplied with the following components authorities requirements for the discharge of... -
Page 14: Wall Drilling And Bracket Fixing
INSTALLATION INSTRUCTIONS Wall drilling and bracket fixing Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. •... -
Page 15: Hood Body Mounting
INSTALLATION INSTRUCTIONS Hood body mounting • Before attaching the hood body, tighten the two screws Vr located on the hood body mounting points. �� • Hook the hood body onto the screws. • Fully tighten support screws. • Adjust screws Vr to level the hood body. ���... - Page 16 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.