Appendix 1. Guidance Messages; Error Guidance For Data Setup - Toshiba TOSDIC-CIE DS Instruction Manual

Appendix 1. Guidance Messages

Appendix 1. Guidance Messages
Item
Guidance
Cause
Action
Guidance
Cause
Action
Guidance
Cause
Action
Guidance
Cause
Action
Guidance
Cause
Action
Guidance
Cause
Action
Reference:
Other guidance than is described above is the same as that of OIS-DS engineering tool.
→ : "OIS-DS Engineering Tool Instruction manual" (6F8C0766)
"Appendix 5 Guidance messages"
20
Table A1.1 Error guidance for data setup
New password and Confirm Password is unmatch.
Again, Input New Password.
The initial password you entered does not match with the confirmation
password.
Enter the initial password again and enter the same character string in
the confirmation password field.
Wrong Password.
Again Input Password. (4 characters to 14 characters)
The password entered is less than 4 characters.
Enter at least 4 and up to 14 characters.
Operator's Name not Inputted.
[Initial password setup] button was pressed for the number for which
no operator name has been set up.
Set up an operator name.
Password isn't set.
After you have set up an operator name, you tried to save it without
setting up an initial password.
Set up an initial password before saving the operator name.
Setting error.
Effective range: xxx Characters Limit
The character string you have set up exceeds the effective number of
characters.
Enter character within the setup range.
Same data exists.
The data already exists.
Change the duplicate data.
Description