Casio ClassPad 300 User Manual page 89

k Inputting a Variable Name into an Application
Perform the procedure below when you want to input the name of a variable from the
Variable Manager window into the application from which you started up the Variable
Manager.
u ClassPad Operation
(1) In the Main application, Graph & Table application, or
some other application, move the cursor to the
location where you want to input the variable name.
(2) Start up the Variable Manager to display the folder list.
(3) Find the name of the folder that contains the variable whose name you want to input,
and tap it twice.
(4) Tap the variable whose name you want to input, so its name is highlighted.
(5) Tap [INPUT].
• This exits the Variable Manager and inputs the name
of the variable you selected in step (4) into the
application at the current cursor position.
• In this example, the variable is located in a folder
(bio) that is not the current folder, so the folder name
needs to be specified (bio\list02). If the variable is
located in the current folder, you do not need to
specify the folder name (list02).
1-8-13
Using the Variable Manager
20021201