Casio ClassPad 300 User Manual page 593

u Display
To specify this type of numeric value display format:
Auto exponential display for values less than 10
or greater (when you are in the Decimal mode)
Auto exponential display for values less than 10
or greater (when you are in the Decimal mode)
Fixed number of decimal places
Fixed number of significant digits
u Angle
To specify this angle unit:
Radians
Degrees
u Advanced
To do this:
Perform complex number calculations
(Complex mode)
Perform real number calculations (Real mode)
Display results as a decimal
*1
(Decimal mode)
Leave calculation results as expressions
*1
(Standard mode)
Turn off auto simplification of expressions
*2
(Assistant mode)
Turn on auto simplification of expressions
(Algebra mode) *2
÷
*1 Executing 1 2 in the Decimal mode produces a result of 0.5, while the Standard mode
produces a result of 1 2 .
+ 2x + 3x + 6 E in the Assistant mode produces a result of x
*2 Executing x 2
6, while the Algebra mode produces a result of x
Important!
The Assistant mode is available in the Main application and eActivity application only.
13-3-2
Setup Menu Settings
–2 and from 10
–9
and from 10
Do this:
Select the [Complex Format] check
box.*
Clear the [Complex Format] check box.
Select the [Decimal Calculation]
check box.
Clear the [Decimal Calculation]
check box.*
Select the [Assistant] check box.
Clear the [Assistant] check box.*
2
+ 5
20021201 20030301
Select this setting:
10
Normal 1*
10
Normal 2
Fix 0 – 9
Sci 0 – 9
Select this setting:
Radian*
Degree
2
x + 6.
•
+ 2 x + 3 x +
• •