Husqvarna 330LK Operator's Manual page 3

17. Handle adjustment
18. Drive disc
19. Operator's manual
20. Shaft coupling
21. Vibration damping system
Symbols on the product
WARNING! Be careful and use the
product correctly. This product can
cause serious injury or death to the
operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this
product.
Use a protective helmet in locations
where objects can fall on you. Use
approved hearing protection. Use
approved eye protection.
Make sure that long hair is put above
your shoulders.
The product can cause objects to eject,
which can cause injury.
Maximum speed of the output shaft.
Keep a minimum of 15 m distance to
persons and animals during operation
of the product.
The arrows show the limit for the
handle position.
Air purge bulb.
1660 - 003 - 29.09.2021
Choke.
Fuel.
yyyywwxxxx
Note:
Other symbols/decals on the product refer
to certification requirements for some markets.
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been
shown to meet Federal emissions requirement.
Maintenance, replacement or repair of the emission
control devices and system may be performed by
any nonroad engine repair establishment or
individual.
The rating plate shows
the serial number. yyyy
is the production year,
ww is the production
week.
3