Unit Description; Prepare Measurement - Sanitas SBM 03 Operating Instructions Manual

3. Unit description

1
4
1. Display
2. Memory button M
3. START/STOP
4. Battery cover
5. Wrist cuff
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. mmHg unit
5. Measured pulse
6. Pulse icon
7. Number of memory space
8. Inflate/deflate arrow
9. ‚Change battery' icon

4. Prepare measurement

Inserting battery
• Remove the battery cover (left side of the unit).
• Insert two 1.5 V micro batteries (alkaline, type LR
03). Make absolutely sure that you insert the bat-
2
5
3
9
8
7 6
teries with the correct polarity as marked. Do not
use rechargeable batteries.
• Replace the battery cover carefully.
If the ‚change battery' icon
ment is no longer possible and you must replace all
the batteries.
Note: You will find these markings on bat-
teries containing harmful substances:
Pb = battery containing lead, Cd = bat-
tery containing cadmium, Hg = battery
containing mercury.
Setting date and time
It is vital to set date and time. Only in this way is
1
it possible to save and subsequently retrieve your
measured values with the right date and time.
2
Time is shown in 24 hour format.
Note: If you hold down ‚M', you can set the values
3
faster.
4
• Press ‚ ' and ‚M' simultaneously. The month starts
5
flashing. Using the ‚M' button, set the month 1 to
12 and confirm with ‚ '
• Set the day, hour and minute and confirm in each
case with ‚ '.
12
is displayed, measure-
Pb Cd Hg