Advertisement
Quick Links
Rack Adapter Panel
GRA-433
Assembly Manual
GW INSTEK PART NO. 82RA-43300M01
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER
Advertisement
Related Manuals for GW Instek GRA-433
Summary of Contents for GW Instek GRA-433
- Page 1 Rack Adapter Panel GRA-433 Assembly Manual GW INSTEK PART NO. 82RA-43300M01 This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
- Page 2 GRA-433 Assembly Manual GRA-433 The GRA-433 rack mount is suited for the GPT-9904. The GRA-433 supports the EIA standards for use with standard-sized rack units. The GRA-433 holds one GPT unit and fits in a standard 19” 4U rack. Rack Mount Adapter Component List and Assembly...
- Page 3 GRA-433 Assembly Manual 2. Remove a screw from each side panel (bottom front) from the unit. 2 screws in total, one hidden from view in the diagram below). 3. Attach the 4 L-type brackets using the 594B-W3008NS1 screws to the unit.
- Page 4 GRA-433 Assembly Manual 5. Attach the unit to the bottom plate with the L-brackets and the 594B-W4010NS1 screws. Make sure the front panel butts up against the front plate of the rack.