Locator & Navigation Buttons; Desktop - Matco Tools MaxLiteA Manual

1. Press and hold the POWER but-
ton for about 3 seconds to turn
on the tablet. The system starts
initializing and then enters the
home screen.
3.3 Locator & Navigation Buttons
On-screen keys and status bar are as follows:
Tap on to return to the previous screen or exit the
1 application. Alternatively user can perform the same
function by pressing the
Tap on to navigate to the Android System's home
screen. Alternatively user can perform the same
2
function by pressing the
Tap on to display a list of applications that are
currently running or recently used. To open an
3
application, tap on it. To remove an application, swipe
it upwards.
Tap on to capture the current screen and all
4 captured screenshots are stored in the Screenshots
folder.
2. To turn the tablet off,
press and hold the
POWER button until
a n o p t i o n m e n u
a p p e a r s . Ta p o n
"Power Off".
button on the tool.
button on the tool.

3.4 Desktop

Adjusting Screen Brightness
The tablet is equipped with a built-in light intensity sensor. It
can adjust the screen brightness according to the ambient
light intensity automatically. Alternatively, you can also adjust
it manually.
1. On the home screen, tap on
Settings ->Display ->Bright-
ness.
2. Drag the slider to adjust it.
Setting Standby Time
If no activities are made within the defined standby period,
the screen will be locked automatically and the system
enters sleep mode to save power. To set the standby time
interval:
1. On the home screen, tap on
Settings -> Display -> Sleep.
MDMAXLITEA
Tips: Reducing the
b r i g h t n e s s o f t h e
screen is helpful to
save the power of the
tablet.
2. Choose the desired
sleep time.
7