Manual Diagnosis - Matco Tools MaxLiteA Manual

diagnostic report.
• To perform other functions, tap on "Quick access" to
directly go to the function selection screen. Choose the
desired one to start a new diagnostic session.
2). If the scanned or entered VIN can not be retrieved from
the server database, the following pop-up message
displays:
In this case, select the vehicle model manually to perform
vehicle diagnosis.

5.2.2 Manual Diagnosis

Take Demo as an example to demonstrate how to diagnose a
vehicle.
1). Select diagnostic software version: Tap on the "DEMO" to
go to Step 2.
18
Fig. 5-12
On-screen Buttons:
Vehicle Coverage: Tap to view the vehicle models that the
current diagnostic software covers.
W h a t 's n ew : Ta p t o v i ew t h e o p t i m i ze d i t e m s a n d
enhancements.
Introduction: Tap to check the software function list.
Note: Tap to read some precautions on using the current
diagnostic software.
OK: Tap on it to go to next step.
2). Select test item: Select the desired test item to proceed.
MDMAXLITEA
Fig. 5-13