3.3.
Activation
・ Connect the controller and the PC with the optional RS-232C cable.
・ Click "START" - "Programs" - "Canon Scanner" - "GALILEO".
・ Setting the COM port
Select the connected RS-232C port and press the OK button.
・ The control screen is displayed.
While communication with the controller has not started yet, the screen displays "DISCONNECT"
in gray at the upper left as the connection status.
Connection
Status
Note: The value of each item on the above screen depends on the controller status.
CANON Digital Galvano Scanner System KP-1SM Series + GC-251
Users Manual 1.00
30