Quick Start Guide Quick Start Guide Please read this guide before operating this scanner. After you finish reading this guide, store it in a safe place for future reference. Package Contents ... 1 Installing the Software ... 2 Preparing the Scanner... 3 Try Scanning ...
Page 2
(EEA: Norway, Iceland and Liechtenstein) For Customers in Europe, Middle-East, Africa and Russia only For Canon Customer Support contacts, please see the back cover of the European Warranty System (EWS) Booklet or visit www.canon-europe.com. Warning When you use this product, you should pay attention to the following legal issues: •...
Installing the Software Installing the Software • Do NOT connect the scanner to a computer before installing the software. If you connect the scanner and the Found New Hardware Wizard appears, click [Cancel]. • Quit all running applications before installation, including anti-virus software.
• Handle the scanner with both hands. Be careful not to drop the scanner. • Always lock the scanner when carrying or transporting it. • When locking the scanner, do not lift up the back and tilt the front (scanner button location) downward. You may be unable to set the lock.
For Macintosh: Open [Applications] - [PhotoStudio] folders, then double-click the [PhotoStudio] icon. From the [File] menu, click [Select Source] and select the scanner model. For Windows: Do not select the one that includes [WIA] in the model name. Click the [Acquire] icon Select the type of document you are scanning in [Select Source] and click [Preview].
Install] option of the CanoScan Setup Utility program. See "Installing the Software" on page 2. • For Mac OS X 10.3 and 10.2.8: Before using the scanner buttons, you need to set Image Capture (in [Applications] folder) to open CanoScan Toolbox automatically when a scanner button is pressed.
Scanning Film This scanner can scan 35 mm film (film strip or slide) and 120 format film. Follow the procedure below when scanning film. Make sure that the FAU Cable is connected to the FAU connector on the back of the scanner Remove the protective sheet from the document cover.
Page 9
35mm Slides Align the Film Guide’s tab with the FILM symbol on the document glass of the scanner. Place a slide or slides face down (correctly viewed from below) in the Film Guide as shown in the diagram to the right.
Page 10
Place a check mark beside the number(s) of the frame(s) you want to scan. Perform image corrections as needed. Click [Scan] to start scanning. Do not move the scanner while it is operating. When prompted to close ScanGear, click [OK]. Save the scanned image in ArcSoft PhotoStudio and close the window.
AC adapter type varies according to the region in which the scanner is purchased. Use only AC adapters listed in the user instructions.(Canon AC Adapter: K30279 is for United Kingdom and K30278 is for other EU countries). Do not use them for other products.